Experience Sharing
2025 Quarter 1 Issue 53
A very interesting project led by Adrian Kaninski from Plastigo
Company Plastimex, producer of PVC, PP PE pipes purchased Borche machine with Shini auxiliary equipments. Project was very difficult mainly because of lack of space for the machine and also very specific placement of it. IMM was widened due to wide mould cores. Another challenge was to select appropriate ST3 robot that needed to be chosen from the measurements coming out of the project.
Due to the weight of the detail, gripper was designed from the scratch. X axis release was used with a success what resulted with cooperation of the machine ejector with the X axis movement. This allowed to stabilization and firm grip of the detail.
SHINI Europe
UL. BOR 77/81 42 202 CZESTOCHOWA POLAND
Contact Person：Renata Migalska
Tel: +48 34 363 48 78
Fax: +48 34 360 88 66
E-mail: r.migalska@shinieurope.com
website: www.shinieurope.com
Due to the weight of the detail, gripper was designed from the scratch. X axis release was used with a success what resulted with cooperation of the machine ejector with the X axis movement. This allowed to stabilization and firm grip of the detail.
SHINI Europe
UL. BOR 77/81 42 202 CZESTOCHOWA POLAND
Contact Person：Renata Migalska
Tel: +48 34 363 48 78
Fax: +48 34 360 88 66
E-mail: r.migalska@shinieurope.com
website: www.shinieurope.com
Experience Sharing
If you want to read other articles, back to2025 Quarter 1 Issue 53.