SHINI PLASTICS TECHNOLOGIES, INC. <a href='http://www.miitbeian.gov.cn/state/outPortal/loginPortal.action' target='_blank'>粤ICP备16031120号-1</a> Language
Foot shock
Foot shock

BACK
Inquiry
E-Catalog
DOWNLOAD
Introduction
It adopts the new installation technology which breaks the traditional installation method and allows to be put into production with installation of shock foot. Therefore, it greatly reduces the installation period, particularly conducive to integration and adjustment of the production line.
'
Caractéristiques
  • It adopts a unique material formulation and bosses rubber isolation pads, and thus can play the role of isolation and shock absorbers. Isolation rate is up to more than 85%; the machine finish is improved by level 1-2.

  • Compared with rigid foot, shock foot can lower noise by 3-5 dB, which can improve the working environment.

  • With shock foot, the machine is in a free state, which improves the dynamic characteristics of the machine to prevent the machine deformation and improve product quality as well as machine life.

  • With machine, it’s no need to install anchor bolts, which make it easy to operate as well as saving time, effort and cost. Compared with the traditional installation method, the installation period is shortened by more than tenfold. It’s especially suitable for machine relocation.

  • It can be the foot shock dedicated to molding machine and die-casting machine. Choose according to the machine weight and property. The product is widely used in plastics, rubber machinery, metal cutting machine tools, food machinery, paper equipment, packaging machinery and machines have higher requirements toward shock insulation, like precision instruments, precision machinery, air compressor, blower, etc.

  • The product material is practical, rugged material which is approved by users. It can be selected according to the user's own demand, and thus can fully meet customer needs.

  • SH110：Suitable for machines with clamping force below 100 tons; also suitable for general machine tools (Configuration depended on the machine screw); each machine is equipped with 8PCS shock foot. One-piece carries 1.0 ton.

  • SH130：Suitable for machines with clamping force below 300 tons; also suitable for general machine tools (Configuration depended on the machine screw); each machine is equipped with 8PCS shock foot. One-piece carries 2.0 ton. For Haitian injection molding machine with clamping force below 120, shock feet SH130 is usually used.

  • SH160：Suitable for machines with clamping force below 600 tons; also suitable for general machine tools (Configuration depended on the machine screw); each machine is equipped with 8PCS shock foot. One-piece carries 3.0 ton. For Haitian injection molding machine with clamping force below 300, shock feet SH160 is usually used.

  • SH240：Suitable for machines with clamping force below 1600 tons; also suitable for general machine tools (Configuration depended on the machine screw); each machine is equipped with 8PCS shock foot. One-piece carries 7.5 tons.

  • Notes: "Tons" refers to the clamping force of the injection molding machine. Clamping force: It's the lock force that the injection molding machine gives to the mold for againsting the expansion force which the melt inside the mold cavity has over the mold when injecting.