 |
 |
Language |
FAQ
Drying and Dehumidifying
Q1.Doese SHD (EURO type hopper dryer) have week-timer function which could be convience for us to set the ON/OFF time of SHD everyday in order to automatically switching on/off SHD?
Yes, SHD(EURO type hopper dryer) have this function,which could be convience for customer to controll working time of SHD through automatically swiching ON/OFF SHD. For example, it is possible to swich on SHD at 5:00 AM and switch off it at 8:00 PM, also do such action which turn on SHD at 5:00 AM on monday and turn off it at 8:00 PM on saturday to achieve continuous production.
Q2.Dose the SMD need to be provided cooling water when SMD is working? If yes, what is temperature of the cooling water?
It is needed to provide cooling water for SMD in order to keep it work at ideal status. Temperature of cooling water is about 10 celsius degree.
Q3.How to set shut off time of material conveying system of SCD (ALL-IN-ONE compact dryers), what is the suitable time?
Press Timer button in controll panel of SCD for three times, adjusting shut off time by pressing UP or DOWN button, save this paramter through pressing ENTER button. This time will vary with the differenct application, it is relative with length of material conveying pipe, bulk density of material and so on. Default value of this parameter is 5 seconds.
Q4.Regenerative temperature of SD is 150 celsius degree. Can it be higher than 150?
Yes, this temperature could be set at higher value if heater power is enough, but we strongly suggest that customer don't change this value because higher temperature may reduce life time of honeycomb rotor.
