SHINI PLASTICS TECHNOLOGIES, INC.

FAQ

Granulating and Recycling

Q1.How to select appropriate granulators?

Firstly we should confirm if the max dimension of regrind materials is smaller than the diameter of feed-in port of cutting chamber. The machine is not available if it is larger. Granulators are also selected according to the thickness and hardness of materials besides acceptable dimensions, so as to reach desired throughput capacity and save energy. Lastly, screen mesh should be selected according to particle size of regrind materials and type of model.

Q2.We kindly ask you to advise if you have crusher for lumps: Thickness: 10cm;
Length: 50-100 cm;
Output capacity: 150kg/hour.

Our granulator cannot granulate coal or stone. But professional crusher can do it.

Q3.Could you please tell me if it is possible to change the feeding chamber of granulator from standard feeding chamber to straight? I mean SG 20 series only feeding chamber.

Of course, Shini can do it, please see the option 5 in category of SG-16/20.

Q4.The customer wants to put the large panel 35 x 200cm into the grinder without further sawing. The thickness is about 4 cm (40 mm) but this is reinforced with a grid structure (not solid), The wall thickness is about 1,5 mm.What grinder do you advise?

There is unsuitable model for this case because the plate is too large and reinforced by grid structur.

Q5.We kindly ask you to advise the suitable crusher for following application:
A. PVC pipes: Max. Diameter 150mm; Thickness 1.5mm;
B. HDPE pipes: Max. Diameter 500mm; Thickness 45mm.

A. PVC PIPES--- SG-2028+straight-in feeding hopper
B. HDPE pipes ---- SG-7090+side feeding hopper