 |
 |
Language |
FAQ
Dosing and Mixing
Q1.Please indicate us for example of SCM: For an extrusion machine with maximum output weight: 80 Kg/h. What's the value of F-03?
80/60=1.33kg/min=133(10g)/min
You should enter the value 133(10g)/min into F-03, simultaneously ensure the unit of F-09 (weight of after 50s test) is same with the F-03 (for this example, it is (10g)/min).
You should enter the value 133(10g)/min into F-03, simultaneously ensure the unit of F-09 (weight of after 50s test) is same with the F-03 (for this example, it is (10g)/min).
Q2.Our customs bought a set of SVM-38-16+MS, but they did not need the blender so they removed it and then they found lacking some parts. What accessories should they buy for using?
It can work without the blender, just use a plate to cover the hole on the base. The machine also can work without magnetic frame.
Q3.What is the difference among SCM, SCM-E and SCM-D? SCM-D can work alone?
The difference between SCM and SCM-E is the different motor and control system.
The controller of SCM-E can control the speed of the motor directly. Customer should test and calculate the needed rotational speed of motor. Please see the instruction for detail.
SCM-D can work alone with any one of them. the control system of each unit is independent.
The controller of SCM-E can control the speed of the motor directly. Customer should test and calculate the needed rotational speed of motor. Please see the instruction for detail.
SCM-D can work alone with any one of them. the control system of each unit is independent.
